新濠天地3559.cσm(新澳门)娱乐平台-最新GREENMAX

Dust collector is a cylindrically shaped dust collector for venting of pneumatically filled silos. Its stainless steel body contains vertically mounted, Sinter-plateFilter elements. The air jet cleaning system is integrated in the hinged weather protection cover. +

Dust shake collector is a polygonal shaped silo venting filter for silos which are filled by tankers.
Dust is separated from the dirty air flow by means of a multipocket Sinter-plate filter element. Dust drops back down into the silo after elctromechanical shaking of the filter element. +

HIGH EFFICIENCY IN DUST FILTERING
This is a rigid and free standing medium, manufactured by sintering of a specific combination of granulated synthetic polymers. Its porous structure is fully coated with a thin layer of PTFE.

Sinter-plate filters allow entrance of high dust loads with emission value lower than 1mg/Nm3, ensuring compliance with the strictest pollution regulations and allowing in most cases the return of filtered air to the place of work (energy saving in air-conditioned areas).

+

+

Sintered plates are the most important filter elements in a sintered plate dust collector for gas-solid separation.
Sintered plates are made of special polymer matrix composites that have been sintered and made compatible with special high-temperature furnaces. After sintering, the matrix has irregular and fully connected micropores. Only the gas can pass through the micro-holes, and the particulate dust remains on the surface, thereby achieving the effect of dust removal and filtration. Moreover, the surface of the sintered plate is coated with a reinforced PTFE resin film. This resin film has a strong self-cleaning function and can effectively prevent dust from sticking during operation. In addition, the use of gas recoil technology can automatically ash, to ensure a stable resistance loss.
Most sintered plates have a rectangular structure, and the filter portion has a wave plate structure to increase its effective area for dust removal and filtration.
+

+

High filtration accuracy and better air permeability

Large filtration area and high dust capture efficiency

Strong self--cleaning ability; Stable pressure loss

Strong acid and alkali resistance

Excellent moisture and oil resistance

Excellent mechanical performance; Super long service life

+

Sinter plate is the most important filtering element of sinter plate dust collector for gas-solid separation.
Sinter plate is made of special polymer based composite after compatibility matching and sintered in special high temperature furnace. After sinter molding, the matrix has irregular and fully connected micro-pores. Only the gas can pass the micro-pore, and the micro-particle dust is retained on its surface, thus achieving the dust removing and filtering effect. Moreover, the surface of the sinter plate is coated with reinforced PTFE resin membrane. This kind of resin membrane is featured by extremely self-cleaning function, and can effectively prevent dust cementation when it is working. Additionally, it can automatically discharge ash by adopting the gas back-flushing technique to ensure stable drag loss.
Most sinter plates have rectangular structure, and the filtering part has wavy plate structure to increase its effective area for dust removing and filtering. +

+